BM launches brake test pit
To meet the DVSA requirement for loaded testing, BM has introduced its prefabricated steel brake test pit, the BM65, to the UK.
“This is a new concept in easy installation of vehicle test equipment,” said the company.
“Designed for the rigours of outside testing in Scandinavia, this unit is tough and resilient.
“The BM65 is the easiest way to provide load simulated axle testing [and] requires no concrete for installation; the walls are strong enough to be directly placed in the ground.
“The entire unit is factory-built and can be pre-fitted with either a BM14200 brake tester and chassis loading, or a 16-tonne lifting rollerbed BM18200 brake tester and wheel play detector.”
The unit can be fitted into a suitable site within a day; only drainage and power need be connected.
The BM65 can be fitted with a hydraulic lifting lid for outside use, or without for indoor use. Further features include side entrance steps for under-vehicle access, and an electric lifting standing area for different height floor level.
Should an operator move sites, because the BM65 is not concreted into the ground, it can be taken along with them.
Heating units can be included for winter outside use.
More information is available from BM agents.
